MIFARE & I•CODE Pegoda Contactless Card Reader CL RD701

The Pegoda reader, the CL RD701, is a contactless reader based on the CL RC632 reader IC. The
CL RC632 is member of a family for highly integrated reader ICs for contactless communication at
13.56 MHz. All layers of ISO14443A+B, ISO 15693 as well as the MIFARE® classic crypto are supported. The Pegoda reader is designed to fulfil several requirements. It covers all functionality of the CL RC632 to be able to use this reader as a reference design for a new hardware design based on the CL RC632 reader IC and is designed for easy PC adaptation and application development as well.

–contactless smart card reader
–based on the CL RM701 reader module containing the CL RC632 reader IC
–contactless operating frequency 13.56 MHz
–Supports MIFARE Dual Interface Card ICs and ISO 14443A part 1- 4
–Supports ISO 14443B
–Supports MIFARE® Classic crypto
–Supports ISO 15693
–Supports ICODE
–Typical operating distance: 75 – 100mm
–CE and FCC compliant
–USB host interface
–USB bus powered 5 VDC power supply
–Unique serial number of each reader device
–Supported by Windows 98 OSR2, Windows ME, Windows 2000 and Windows XP.

Ordering Information:

Type 12NC Description
CL RD701 9352 764 08122 Bulk kit containing: 10 pcs CL RD701 Pegoda reader, 10 pcs USB cable 10 pcs Ferrite

Table 1-1: CL RD701 Ordering Information

CL RD701 Pegoda Parts
The Pegoda reader, the CL RD701, is divided in two parts:
–CL RM701: reader module. This reader module is the basic print including the CL RC632, a μ-Controller and all interfaces to a host. Please refer to the data sheet ‘MIFARE MF RM700 Contactless reader module’.
–MF AN700: a flexible Pegoda antenna. Please refer to the application note ‘MIFARE MF RM 700 Antenna and matching adapter description’.

USB Type B Plug
The USB type B plug is the default configuration of the Pegoda reader to connect the reader to a host PC.

Power Supply
The CL RD701 is a bus powered 5 V USB device. No external power supply has to be connected to start to work with the Pegoda.
In order to fulfil the USB specification version 1.1, the reader module behaves after power on like a low power device. Having sent an activate command, the Pegoda is activated and the reader module switches to an idle state resulting in an increased power consumption.

Operating Condition Range

Tamb Ambient Temperature - -10 +25 +70 °C
VDD DC Supply Voltage DVSS = 0V 4.5 5.0 5.5 V

Table 3-1: Operating Condition Range

Current Consumption

IDVDD   Supply Current StandBy - 70 - mA
IDVDD   Supply Current Idle, RF off - 160 - mA
IDVDD   Supply Current Idle, RF on - 250 - mA

Table 3-2: Current Consumption

Operating distance

OD operating distance measured from the middle of the reader surface - 0-75 - mm

Table 3-3. Operating Distance

Interface Characteristics

USB­baud USB-baudrate cable length max. 3 m - 12 - Mbaud

Table 3-4USB Characteristics
Note: The FCC and CE certification are only valid when the USB cable is equipped with the shielding components.

The CL RD701 fulfils the following requirements of electromagnetic compatibility:
FCC, Part 15 and CE.

FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

The Federal Communications Commission warns the users that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Accessories: This equipment has been tested and found to comply with the limits of a Class A digital device.
The accessories associated with this equipment are as follows:
–Shielded video cable
These accessories are required to be used in order to ensure compliance with FCC rules.